BarerNeat System

BarerNeat is used for flattening the bases. At the same time, it is designed for offering all kinds of excellent coating preparations. It is made from advanced and modified high polymer, along with other raw materials

BarerNeat Elastic Mucus

It is smooth and resilient, and able to combine perfectly with all inorganic base surfaces. As a result of its superior elasticity, it is ideal for flattening brick, concrete, mortar, wood and plywood, and is widely used for flattening the bases of sauna, kitchens and bathrooms.


Advantages & Benefits:

  • Exceptional adhesion with inorganic bases

  • Extraordinary flexibility and resilience

  • Small contraction, texture is fine and firm

  • Marvellous waterproof and permeability

  • Non-toxic formulation is safe to install

  • Meets V.O.C. emissions regulations to eliminate facility downtime during application

Technical Data:

Series

Inspection project (Standard)

Index values

1

Fineness

100~140μm

2

Drying time

30 min (surface);
24h (full cure)

3

Elasticity

100%

4

Oil resistance

24h oil-proof

5

Aging Resistance (ASTM G26)

1000h no effects noted

6

Water-resistance

0.3MPa, 30min waterproof

7

Permeability  (ASTM G96)

3perms

8

Alkali-resistance

Excellent

9

Ability to bear scrubbing

It can be scrubbed up to 5 times without having crimping

10

Ability to be polished

Easy to be polished

11

Storage conditions 

Cool and dry places

Application Specifics:

Preparation:

  • Mix 86-part BarerNeat, 55-part cement, and 9.5-part water. Stir thoroughly.  Wait 10 minutes, slurry is produced.

Application:

(A)    Use spreading knife to apply BarerNeat slurry. Ensure that the surface is flat. The thickness is about 1-2mm.

(B)    After the surface is dry, use sand paper to smoothen it, and clean up all the loose flakes.

(C)    Three coats of BarerNeat slurry are recommended. Ensure that the surface is smooth.

             Clean Up:

Use wet cloth to clean up the BarerNeat leftover in adjacent surfaces.

Additional notes:

Do not apply BarerNeat to organic coating surface. It is not suitable for low-absorbability materials like old bricks and mosaic.

BarerNeat Special Mucus

BarerNeat Special mucus has extraordinary adhesion. It is especially formulated with smooth materials and low-absorbability materials like old bricks and mosaic. Furthermore, it is perfect for flattening organic coating surfaces


Advantages & Benefits:

  • Outstanding adhesion with low absorbability materials and with smooth materials

  • Exceptional resilience

  • Prominent ability to bear scrubbing for extra durability

  • Superior acid and alkali resistance and waterproof

  • Non-toxic formulation is safe to install

  • Simple to install

  • Meets V.O.C. emissions regulations

Technical Data:

Series

I Inspection project (Standard)

Index values

1

Tensile Strength of cure system
(ASTM C190-85)

2.62MPa

2

Adhesion strength (PA114)

4.56MPa

3

Resilience (ASTM D412)

33%

4

Aging-resistance (ASTM G26)

3600h No effects noted

5

Permeability  (0.2 MPa, 30min)

 Impermeable

6

Drying time

<2h (surface); <24h (full cure)

7

Storage conditions

Do not freeze it

Application Specifics:

Preparation:

  • Mix one-part BarerNeat Special Mucus, one-part water, three-part cement, and one-part quartz sand. Stir thoroughly. The slurry is ready for use.

Application:

(A)    Spread BarerNeat Special Mucus slurry. Ensure that the surface is flat. The thickness is about 0.2-0.5mm.

(B)    Two coats of BarerNeat Special slurry are recommended. It can work with BarerNeat Elastic.

             Clean Up:

           Use wet cloth to clean up the leftover in adjacent surfaces.

USA Hydro-Stop (CHINA) CO.,LTD
Add:21/FL , NEW World Towerl.18 queen's Road Center , HK
Tel:852-2971-2851   Fax:852-3519-9727

Approvals
A world leader in producing environmentally safe roofing and waterproofing systems.