FlexCoat System

NatoneCoat shares the same decoration characteristics with marbles and granites.  More importantly, it has its own unique functions such as waterproof, non-radiation, pollutant-resistance, mildew resistance and climate-tolerance. Above all, it tackles the same problems like colour fading as traditional clear coats do. NatoneCoat is made from special raw materials including highly adhesive polymer, together with natural colours sand.

Uses:

  • Brick and concrete waterproofing
  • Wood wall waterproofing
  • Metal wall waterproofing
  • Pillars, corridors, ceilings, and exterior walls waterproofing and decorating

Advantages & Benefits:

  • Has the same quality as natural stones. Colours are exquisite
  • Extraordinary adhesion, it does not peel off
  • Exceptional climate-tolerance, it never fades away
  • Ultraviolet and Infrared resistant for extra durability
  • Multi application methods to achieve appealing architecture effect
  • Mildew, algae and fungus resistance
  • Non-toxic formulation is safe to install
  • Meets V.O.C. emissions regulations to eliminate facility downtime during application
  • It lasts up to 25 years under a proper maintenance schedule

Technical Data
 

Series

Inspection projectStandard

Index values

1

State in the containerGB/T9755-2001

      Lump-free when it is stirred evenly 

2

Stone material sedimentation, %GB/T9755-2001

≤10

3

Stability at low temperaturesGB/T9755-2001

Maintain excellent conditions

4

Drying timeGB/T9755-2001

≤2h (surface)
≤24h (full cure)
≤7d (complete solidification)

5

Coating colours and appearanceGB/T9755-2001

The appearance remains changed; Sand wall effect

6

Contrast ratio (2mm) GB/T9755-2001

1

7

Water resistance (96h) GB/T9755-2001

No effects noted

8

Alkali-resistance (48h) GB/T9755-2001

No effects noted

9

Ability to bear scrubbing, timesGB/T9755-2001

≥10000

10

Dirt-resistancedecline rate of reflection coefficient (White 5 times) %GB/T9755-2001

≤8

11

Ability to bear temperature changes
(10 times
)GB/T9755-2001

No effects noted

12

Adhesion strength ((ASTM D638)

0.69MPa(1mm)

13

Aging resistance (ASTM G26)

3600h No effects noted

14

Mildew resistanceASTM G29

No growth supported

15

Ultra violet resistance

Excellent

16

Solidification environments and temperatures

Room temperatures432℃)

17

Shelf life and storage conditions 

18 months if unopened /Do not freeze it

Application Specifics:

      Surface Preparation:

  • Remove any loose or flaking particles, scale, dirt, rust or oil.
  • NatoneCoat can be directly applied to concrete walls, bricks, wood walls, foam materials, plaster, plastics, and metal or glass surfaces. Spread the coat evenly, and keep it clean and dry.

Application:

(A)    Apply one coat of SubonPrimer to the primed base. Drying time is approximately 8 hours;

(B)    Apply the first coat of NatoneCoat to the primed walls by using pump-up sprayers with 6-8Kg/m2 air pressures. The coating is about 3-5mm thick;

(C)    After it is dry thoroughly, use SubonPrimer (S) clear coat evenly as covering coat by sprayer or rollers;

(D)    Application temperature is above 4. Relative humidity is below 85%.

      Clean Up:

       Protect adjacent surfaces not receiving waterproofing by using plastic covers


USA Hydro-Stop (CHINA) CO.,LTD
Add:21/FL , NEW World Towerl.18 queen's Road Center , HK
Tel:852-2971-2851   Fax:852-3519-9727

Approvals
A world leader in producing environmentally safe roofing and waterproofing systems.