FlexCoat System

SiconCoat is made from the best quality of organic silicon-grafted and modified high polymer and other outstanding weathering-resistant raw materials. It has following characteristics like extraordinary climate-resistance, waterproof, pollution-resistance, and mildew-resistance.

Uses:

  • Brick and masonry wall waterproofing and crackbridging
  • Flashing of all types
  • Concrete waterproofing
  • Wood wall waterproofing
  • Plywood waterproofing
  • Metal exterior wall waterproofing
  • Highly-polluted wall waterproofing

Advantages & Benefits:

  • Brilliant weathering-resistance and long colour-retention
  • Excellent adhesion, it does not peel off
  • Ultraviolet and Infrared resistant for extra durability
  • Wear-resistant and hard to damage
  • Mildew, algae and fungus resistance
  • Tolerance to acid rain and chemical pollutants, protecting roof or wall from fallout damage
  • Non-toxic formulation is safe to apply
  • Meets V.O.C. emissions regulations to eliminate facility downtime during application
  • Wide range of colours provide stunning architectural finish
  • Excellent water-resistance and the ability to bear scrubbing
  • Highly elastic so that it moves with cracks
  • Easy application and cleanup
  • No special equipment required to install
  • It lasts at least 20 years under a proper maintenance schedule

Technical Data:

 

Series

Inspection projectStandard

Index values

1

State in the containerGB/T9755-2001

 Lump-free when it is stirred evenly

2

Application abilityGB/T9755-2001

Can be applied up to 2 coats

3

Stability at low temperaturesGB/T9755-2001

Maintain excellent conditions

4

Drying timeGB/T9755-2001

≤2h (surface)
24h (full cure)
≤7d (complete solidification)

5

Coating colours and appearanceGB/T9755-2001

Coating appearance remains unchanged,

Colour variance△E≤0.2

6

Contrast ratio (white) GB/T9755-2001

0.95

7

Water- resistance (96h) GB/T9755-2001

No effects noted

8

Alkali - resistance (48h) GB/T9755-2001

No effects noted

9

Ability to bear scrubbing, timesGB/T9755-2001

≥10000

10

Dirt-resistancedecline rate of reflection coefficient (White 5 times), %GB/T9755-2001, %GB/T9755-2001

≤8

11

Ability to bear temperature changes10 times)(GB/T9755-2001

No effects noted

12

Elongation (ASTM D638)

3.36MPa(1mm)

13

Aging resistance (ASTM G26)

2000h No effects noted

14

Algae and fungus resistanceASTM G29

No growth supported

15

Air permeability ASTM G96

3perms

16

Ultra violet resistance

Excellent

17

Shelf Life and Storage Conditions 

118 months if unopened /Do not freeze it

Application Specifics:

      Surface Preparation:

  • Remove any loose or flaking particles, scale, dirt, rust or oil.
  • Use BarerNeat to fill the gaps. Repair any damaged mortar and fill all cracks with proper filling material.
Flatten and smoothen the surface, and keep it clean and dry.

Application:

(A)    Apply one coat of SubonPrimer to the base wall. Drying time is approximately 8 hours;

(B)    Brush the first coat of SiconCoat to the primed walls. Ensure that the coat spreads evenly, and it is firmly adhered.

(C)    Apply the second coat of SiconCoat by brushes, rollers or sprayers. The drying time between coats is at least 6 hours.

(D)    The third coat of SiconCoat is recommended. Application temperature should be above 4. Relative humidity is below 85%.

      Clean Up:

      Protect adjacent surfaces not receiving waterproofing. Thoroughly rinse with clean water.

 


USA Hydro-Stop (CHINA) CO.,LTD
Add:21/FL , NEW World Towerl.18 queen's Road Center , HK
Tel:852-2971-2851   Fax:852-3519-9727

Approvals
A world leader in producing environmentally safe roofing and waterproofing systems.